Tripp Lite N785-I01-SFP-DU network media converter 1000 Mbit/s Multi-mode, Single-mode Black

Tripp Lite N785-I01-SFP-DU. Maximum data transfer rate: 1000 Mbit/s, Networking standards: IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z, Ethernet interface type: Fast Ethernet, Gigabit Ethernet. Fiber optic connector: SFP, Connectivity technology: Wired. Fiber mode structure: Multi-mode, Single-mode. Product color: Black, Housing material: Metal, Country of origin: Taiwan. Input voltage: 12 - 57 V, Power consumption (typical): 6 W
Manufacturer: Tripp Lite
SKU: 6464347
Manufacturer part number: N785-I01-SFP-DU
MSRP: $218.00
$153.75
Customize a Network Extension over Fiber Optic Cable This unmanaged media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling’s 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential information, including network speed, connection status and unit power. The included 12–57VDC terminal block provides primary and secondary power inputs. You can also power the media converter with a user-supplied 12VDC power supply. Protective Metal Housing Built to Withstand a Variety of Hazards The IP30 industrial-grade aluminum case is protected from entry by tools, wires and other solid objects greater than 2.5 millimeters in diameter. It can also operate in extreme temperatures ranging from -40 to 75 degrees Celsius (-40 to 167 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting. TAA-Compliant for GSA Schedule Purchases The N785-I01-SFP-DU is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

  • Customizable converter extends up to 1000 Mbps (1 Gbps) of data via open SFP port
  • Automatic MDI/MDI-X configuration connects devices without crossover cabling
  • IP30 aluminum housing withstands operating temperature range of -40° to 75°C
  • Primary and redundant power supply ports allow connection of dual DC power sources
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Customize a Network Extension over Fiber Optic Cable This unmanaged media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling’s 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential information, including network speed, connection status and unit power. The included 12–57VDC terminal block provides primary and secondary power inputs. You can also power the media converter with a user-supplied 12VDC power supply. Protective Metal Housing Built to Withstand a Variety of Hazards The IP30 industrial-grade aluminum case is protected from entry by tools, wires and other solid objects greater than 2.5 millimeters in diameter. It can also operate in extreme temperatures ranging from -40 to 75 degrees Celsius (-40 to 167 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting. TAA-Compliant for GSA Schedule Purchases The N785-I01-SFP-DU is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

  • Customizable converter extends up to 1000 Mbps (1 Gbps) of data via open SFP port
  • Automatic MDI/MDI-X configuration connects devices without crossover cabling
  • IP30 aluminum housing withstands operating temperature range of -40° to 75°C
  • Primary and redundant power supply ports allow connection of dual DC power sources
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Products specifications
Attribute nameAttribute value
Master (outer) case GTIN (EAN/UPC)10037332268591
Width1.67"
Depth2.36"
Wavelength-division multiplexing (WDM)Y
Master (outer) case length19.4"
Country of OriginTaiwan
Height1.97"
Weight6.7 oz
Housing MaterialMetal
Master (outer) case weight15.4 lbs
Master (outer) case width10.7"
Master (outer) case height13.5"
Terminal block includedY
Technical details
Product colorBlack
Packaging data
Package width9.33"
Package depth5.04"
Package height2.44"
Package weight10.6 oz
Package typeBox
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Connectivity technologyWired
DC-in jackY
Design
CertificationCE, FCC, RoHS
InternalN
DIN rail mountingY
Operational conditions
Operating temperature (T-T)-40 - 75 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)10 - 95 %
Storage relative humidity (H-H)5 - 95 %
Power
Input voltage12 - 57 V
Power consumption (typical)6 W
Features
Fiber mode structureMulti-mode, Single-mode
LED indicatorsY
Performance
Networking standardsIEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
Maximum data transfer rate1000 Mbit/s
Fiber optic connectorSFP
Auto MDI/MDI-XY
Fiber ports quantity1
Logistics data
Quantity per master (outer) case20 pc(s)
Network
Cable types supportedCat5, Cat5e, Cat6, Cat6a, Fiber
Ethernet interface typeFast Ethernet, Gigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Auto-negotiationY
Product tags
  • (80699)