Tripp Lite N482TAP-4MM73M8 patch panel

Tripp Lite N482TAP-4MM73M8. Networking standards: IEEE 802.3ae, Ethernet interface type: 40 Gigabit Ethernet, 100 Gigabit Ethernet, 400 Gigabit Ethernet, Fiber optic connector: MTP/MPO. Product color: Black, Compatible products: Tripp Lite N482-00U, Tripp Lite N482-01U, Tripp Lite N482-02U, Tripp Lite N482-04U. Package width: 7.9" (200.7 mm), Package depth: 4.7" (119.4 mm), Package height: 2" (50.8 mm). Country of origin: China, Master (outer) case width: 15.4" (391.2 mm), Master (outer) case length: 12.8" (325.1 mm)
Manufacturer: Tripp Lite
Availability: Out of Stock - on backorder and will be dispatched once in stock.
SKU: 6765714
Manufacturer part number: N482TAP-4MM73M8
MSRP: $5,104.00
$3,599.84
Fiber Optic TAP Cassette Helps You Monitor and Analyze Network Data This Tripp Lite N482TAP-4MM73M8 multimode TAP (traffic access point) cassette is a passive device added to a fiber optic network to enable real-time monitoring. Its optical splitter divides the optical signal into two outputs, one for the downstream device and one for monitoring, without introducing latency or creating a single point of failure. Creates a 70/30 Split Ratio for User Traffic and Signal Monitoring Network monitoring is used to gather data to analyze performance issues, optimize network traffic and uncover security threats in your data center, telecom carrier network or R&D facility. This TAP cassette directs 30 percent of the light to a nearby monitoring device. The remaining 70 percent is transmitted as usual throughout the network without affecting performance. Compatible with Tripp Lite Multimode Cabling This passive TAP cassette supports 40/100 Gb internally using multimode fiber optic cable, enabling you to perform monitoring and data analysis without causing delays or affecting network performance. It is compatible with recommended Tripp Lite cables, including the N845-Series, for connecting to switches, routers and monitoring equipment. Easy to Install with Compatible Enclosures The multimode N482TAP-4MM73M8 works with Tripp Lite’s N482-00U (fits one cassette), N482-01U (fits five cassettes), N482-02U (14 cassettes) and N482-04U (28 cassettes) chassis. The futureproof-friendly modular design allows you to remove the cassette without replacing the panel or removing other cassettes. The TAP cassette also complies with IEEE 802.3ae (10 Gb) and ANSI T11.2 (Fibre Channel) requirements. A 0.20 dB maximum insertion loss falls under IEEE 802.3ae maximum channel loss spec of <25 dB. Factory-Terminated Ports Help Reduce Installation Time The OM4-rated cassette has 12 QSFP 8-fiber MTP/MPO ports that allow fast, easy connection of cables. The durable plastic cassette comes with dust caps to protect unused ports.
  • Passive OM4 multimode fiber TAP with 40/100 Gb MPO to MPO ports
  • 70/30 split ratio allows real-time traffic analysis while preserving primary link performance
  • Fiber TAP cassette is optimized for parallel optics and Base-8 connectivity
  • Compatible with Tripp Lite N482-00U, N482-01U, N482-02U and N482-04U panels
Fiber Optic TAP Cassette Helps You Monitor and Analyze Network Data This Tripp Lite N482TAP-4MM73M8 multimode TAP (traffic access point) cassette is a passive device added to a fiber optic network to enable real-time monitoring. Its optical splitter divides the optical signal into two outputs, one for the downstream device and one for monitoring, without introducing latency or creating a single point of failure. Creates a 70/30 Split Ratio for User Traffic and Signal Monitoring Network monitoring is used to gather data to analyze performance issues, optimize network traffic and uncover security threats in your data center, telecom carrier network or R&D facility. This TAP cassette directs 30 percent of the light to a nearby monitoring device. The remaining 70 percent is transmitted as usual throughout the network without affecting performance. Compatible with Tripp Lite Multimode Cabling This passive TAP cassette supports 40/100 Gb internally using multimode fiber optic cable, enabling you to perform monitoring and data analysis without causing delays or affecting network performance. It is compatible with recommended Tripp Lite cables, including the N845-Series, for connecting to switches, routers and monitoring equipment. Easy to Install with Compatible Enclosures The multimode N482TAP-4MM73M8 works with Tripp Lite’s N482-00U (fits one cassette), N482-01U (fits five cassettes), N482-02U (14 cassettes) and N482-04U (28 cassettes) chassis. The futureproof-friendly modular design allows you to remove the cassette without replacing the panel or removing other cassettes. The TAP cassette also complies with IEEE 802.3ae (10 Gb) and ANSI T11.2 (Fibre Channel) requirements. A 0.20 dB maximum insertion loss falls under IEEE 802.3ae maximum channel loss spec of <25 dB. Factory-Terminated Ports Help Reduce Installation Time The OM4-rated cassette has 12 QSFP 8-fiber MTP/MPO ports that allow fast, easy connection of cables. The durable plastic cassette comes with dust caps to protect unused ports.
  • Passive OM4 multimode fiber TAP with 40/100 Gb MPO to MPO ports
  • 70/30 split ratio allows real-time traffic analysis while preserving primary link performance
  • Fiber TAP cassette is optimized for parallel optics and Base-8 connectivity
  • Compatible with Tripp Lite N482-00U, N482-01U, N482-02U and N482-04U panels
Products specifications
Attribute name Attribute value
Master (outer) case GTIN (EAN/UPC) 10037332262629
Master (outer) case weight 13.5 lbs
Master (outer) case width 15.4"
Packaging data
Package depth 4.7"
Features
Compatible products Tripp Lite N482-00U, Tripp Lite N482-01U, Tripp Lite N482-02U, Tripp Lite N482-04U
Performance
Fiber optic connector MTP/MPO
Networking standards IEEE 802.3ae
Fiber ports quantity 12
Network
Ethernet interface type 40 Gigabit Ethernet, 100 Gigabit Ethernet, 400 Gigabit Ethernet