Transition Networks TN-SFP-OC3S8-C53 network transceiver module Fiber optic 100 Mbit/s 1530 nm

Transition Networks TN-SFP-OC3S8-C53. SFP transceiver type: Fiber optic, Maximum data transfer rate: 100 Mbit/s, Interface type: SFP. Certification: MSA. Input voltage: 3.3 V, Power consumption (typical): 0.66 W. Width: 0.512" (13 mm), Depth: 2.17" (55 mm), Height: 0.315" (8 mm)
Manufacturer: Transition Networks
SKU: 6761172
Manufacturer part number: TN-SFP-OC3S8-C53
MSRP: $649.00
$549.87
Per Cisco Systems’s literature, the Cisco switches with SFP slots do not accept modules other than Cisco’s own SFPs. The Cisco switch identifies the manufacturer ID along with the part number and blocks operations to this port for non Cisco interfaces. Other major SFP switch manufacturers do not indicate in their literature that such restrictions are imposed. Transition Networks’s SFP units fully comply with Multi-Sourcing Agreement(MSA). This compliance allows Transition Networks SFP modules to be used on other MSA-compliant SFP platforms without any problems. - Course Wavelength Division Multiplexing (CWDM) ITU grid Compliant Wavelengths - Hot-Pluggable SFP Footprint LC Optical Transceiver - Digital Diagnostic Function - Class 1 Laser International Safety Standard IEC-60825 Compliant - Compatible with Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)
Per Cisco Systems’s literature, the Cisco switches with SFP slots do not accept modules other than Cisco’s own SFPs. The Cisco switch identifies the manufacturer ID along with the part number and blocks operations to this port for non Cisco interfaces. Other major SFP switch manufacturers do not indicate in their literature that such restrictions are imposed. Transition Networks’s SFP units fully comply with Multi-Sourcing Agreement(MSA). This compliance allows Transition Networks SFP modules to be used on other MSA-compliant SFP platforms without any problems. - Course Wavelength Division Multiplexing (CWDM) ITU grid Compliant Wavelengths - Hot-Pluggable SFP Footprint LC Optical Transceiver - Digital Diagnostic Function - Class 1 Laser International Safety Standard IEC-60825 Compliant - Compatible with Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)
Products specifications
Attribute nameAttribute value
Width0.512"
Depth2.17"
Height0.315"
Design
CertificationMSA
Operational conditions
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)10 - 80 %
Storage relative humidity (H-H)10 - 80 %
Power
Power consumption (typical)0.66 W
Input voltage3.3 V
Features
Hot-swapY
Plug and PlayY
Performance
Maximum data transfer rate100 Mbit/s
SFP transceiver standardFX
Maximum transfer distance3149606.3"
Wavelength1530 nm
Networking standardsIEEE 802.3, IEEE 802.3u
SFP transceiver typeFiber optic
Interface typeSFP
Single-mode fiber (SMF) supportedY
Fiber optic connectorLC
Auto MDI/MDI-XY