Intellinet 561822 network switch Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black

Intellinet 561822. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 5, Installed SFP modules quantity: 1. MAC address table: 2000 entries, Switching capacity: 12 Gbit/s. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x. Power over Ethernet (PoE). Wall mountable
Manufacturer: Intellinet
SKU: 6597266
Manufacturer part number: 561822
MSRP: $124.99
$118.73
Desktop 5-Port PoE Switch with Gigabit Uplinks - Supports 10/100/1000 Mbps, Power over Ethernet 802.3at The 5-Port Gigabit Ethernet PoE+ Switch with SFP Port from Intellinet Network Solutions passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports - four of which are high-power PoE+ PSE ports - this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps. High-power PoE+ with output up to 30 watts This switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimizes the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. Gigabit Uplinks The switch is equipped with one Gigabit RJ45 and one SFP transceiver module slot. These Gigabit uplink ports are ideal for connecting the switch to the network's backbone, a server or, perhaps, your video recording solution (NVR). Wall-mount option For full installation flexibility, you can mount the switch on the wall through its four built-in holes or use the included non-slip rubber feet to place it on a desktop.

 

  • Provides up to four PoE network devices with power and data
  • Four 10/100/1000 Mbps IEEE 802.3at/af-compliant RJ45 PoE ports, one gigabit RJ45 port and one gigabit SFP port
  • PoE power budget of 91 watts
  • Power output up to 30 watts per port
  • Saves installation costs by delivering data and power over existing network cables
  • Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (e.g., wireless access points, VoIP phones, IP cameras)
  • Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
  • 12 Gbps switch fabric
  • 10/100/1000 auto-sensing ports that automatically detect optimal network speeds
  • Auto-MDIX and NWay auto-negotiation support on all RJ45 ports
  • Store and forward switching architecture
  • IEEE 802.3x flow control for full duplex
  • Supports 2k MAC address entries
  • Compact desktop format with rugged metal housing
  • Grounding point to protect equipment from external electrical surges
  • Mounting holes for wall mounting
Desktop 5-Port PoE Switch with Gigabit Uplinks - Supports 10/100/1000 Mbps, Power over Ethernet 802.3at The 5-Port Gigabit Ethernet PoE+ Switch with SFP Port from Intellinet Network Solutions passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports - four of which are high-power PoE+ PSE ports - this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps. High-power PoE+ with output up to 30 watts This switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimizes the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. Gigabit Uplinks The switch is equipped with one Gigabit RJ45 and one SFP transceiver module slot. These Gigabit uplink ports are ideal for connecting the switch to the network's backbone, a server or, perhaps, your video recording solution (NVR). Wall-mount option For full installation flexibility, you can mount the switch on the wall through its four built-in holes or use the included non-slip rubber feet to place it on a desktop.

 

  • Provides up to four PoE network devices with power and data
  • Four 10/100/1000 Mbps IEEE 802.3at/af-compliant RJ45 PoE ports, one gigabit RJ45 port and one gigabit SFP port
  • PoE power budget of 91 watts
  • Power output up to 30 watts per port
  • Saves installation costs by delivering data and power over existing network cables
  • Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (e.g., wireless access points, VoIP phones, IP cameras)
  • Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
  • 12 Gbps switch fabric
  • 10/100/1000 auto-sensing ports that automatically detect optimal network speeds
  • Auto-MDIX and NWay auto-negotiation support on all RJ45 ports
  • Store and forward switching architecture
  • IEEE 802.3x flow control for full duplex
  • Supports 2k MAC address entries
  • Compact desktop format with rugged metal housing
  • Grounding point to protect equipment from external electrical surges
  • Mounting holes for wall mounting
Products specifications
Attribute nameAttribute value
Forwarding rate8928 Mpps
Width6.02"
Depth3.39"
Height1.14"
Weight28.2 oz
Housing MaterialMetal
Power SourceAC
Installed SFP modules quantity1
Switching capacity12 Gbit/s
Power supply includedY
FanlessY
Technical details
Product colorBlack
Flow control supportY
Packaging data
Package weight32.6 oz
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity5
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Design
CertificationFCC Class A, CE, RoHS, UKCA, NDAA
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-10 - 70 °C
Operating relative humidity (H-H)20 - 85 %
Storage relative humidity (H-H)5 - 90 %
Power
Total Power over Ethernet (PoE) budget91 W
Power consumption (max)96 W
AC input frequency50/60 Hz
AC input voltage100 - 240 V
Features
LED indicatorsActivity, Link, PoE, Power
Wall mountableY
Other features
Rack mountingN
MAC address table2000 entries
Packaging content
ManualY
Cables includedAC
Performance
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Network
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-T
10G supportN
Data transmission
Store-and-forwardY
Power over Ethernet (PoE)
Power over Ethernet (PoE)Y