Finisar FTLX8571D3BCV network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

Finisar FTLX8571D3BCV. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+
Manufacturer: Finisar
SKU: 3794035
Manufacturer part number: FTLX8571D3BCV
MSRP: $110.00
$74.09
Finisar's FTLX8571D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, IEEE 802.3-2005 10GBASE-SR/SW and 1000BASE-SX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8571D3BCV is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperability with an SFP+ limiting module. his product is for applications specifically designed for 10G SFP+ ports and 1G/10GSFP+ ports and not native 1G SFP ports. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038. - Hot-pluggable SFP+ footprint - Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s bit rates - Power dissipation < 1W - RoHS-6 compliant (lead-free) - Commercial temperature range 0°C to 70°C - Single 3.3Vpower supply - Maximum link length of 300m on 2000 MHZ-km MMF - Uncooled 850nm VCSEL laser - Receiver limiting electrical interface - Duplex LC connector - Built-in digital diagnostic functions
Finisar's FTLX8571D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, IEEE 802.3-2005 10GBASE-SR/SW and 1000BASE-SX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8571D3BCV is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperability with an SFP+ limiting module. his product is for applications specifically designed for 10G SFP+ ports and 1G/10GSFP+ ports and not native 1G SFP ports. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038. - Hot-pluggable SFP+ footprint - Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s bit rates - Power dissipation < 1W - RoHS-6 compliant (lead-free) - Commercial temperature range 0°C to 70°C - Single 3.3Vpower supply - Maximum link length of 300m on 2000 MHZ-km MMF - Uncooled 850nm VCSEL laser - Receiver limiting electrical interface - Duplex LC connector - Built-in digital diagnostic functions