Finisar FTLX8571D3BCL network transceiver module 10000 Mbit/s SFP+

Finisar FTLX8571D3BCL. Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+, Fiber optic connector: LC. Certification: RoHS. Power consumption (typical): 1 W
Manufacturer: Finisar
SKU: 3794034
Manufacturer part number: FTLX8571D3BCL
MSRP: $110.00
$74.07
Finisar's FTLX8571D3BCL 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3ae 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8571D3BCL is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038. - Hot-pluggable SFP+ footprint - Supports 9.95 to 10.5 Gb/s bit rates (contact Finisar for higher data rate support) - Power dissipation < 1W - RoHS-6 compliant (lead-free) - Commercial temperature range 0°C to 70°C - Single 3.3V power supply - Maximum link length of 300m on 2000 MHz-km MMF - Uncooled 850nm VCSEL laser - Receiver limiting electrical interface - Duplex LC connector - Built-in digital diagnostic functions
Finisar's FTLX8571D3BCL 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3ae 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8571D3BCL is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038. - Hot-pluggable SFP+ footprint - Supports 9.95 to 10.5 Gb/s bit rates (contact Finisar for higher data rate support) - Power dissipation < 1W - RoHS-6 compliant (lead-free) - Commercial temperature range 0°C to 70°C - Single 3.3V power supply - Maximum link length of 300m on 2000 MHz-km MMF - Uncooled 850nm VCSEL laser - Receiver limiting electrical interface - Duplex LC connector - Built-in digital diagnostic functions