Finisar FTLX1471D3BCL network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm

Finisar FTLX1471D3BCL. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+
Manufacturer: Finisar
SKU: 3794033
Manufacturer part number: FTLX1471D3BCL
MSRP: $230.00
$154.90
Finisar's FTLX1471D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1471D3BCL is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038. - Hot-pluggable SFP+ footprint - Supports 9.95 to 10.5Gb/s bit rates - Power dissipation < 1W - RoHS-6 compliant (lead-free) - Commercial temperature range -5°C to 70°C - Single 3.3V power supply - Maximum link length of 10km - Uncooled 1310nm DFB laser - Receiver limiting electrical interface - Duplex LC connector - Built-in digital diagnostic functions
Finisar's FTLX1471D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1471D3BCL is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038. - Hot-pluggable SFP+ footprint - Supports 9.95 to 10.5Gb/s bit rates - Power dissipation < 1W - RoHS-6 compliant (lead-free) - Commercial temperature range -5°C to 70°C - Single 3.3V power supply - Maximum link length of 10km - Uncooled 1310nm DFB laser - Receiver limiting electrical interface - Duplex LC connector - Built-in digital diagnostic functions