Black Box ECMH2UD rack accessory

- Easy to put together and run cables through. - Use to manage and route cables efficiently in EIA standard 19" racks. - Horizontal and vertical units can be used alone or together in a 2- or 4- post open frame rack. - Guaranteed for life! - Double-hinged removable covers provide easier access during installation. - No obstructions. An entire unit can be used for cables routing. - Available in 1U single-sided and 2U single- and double-sided versions. - Arrowhead-shaped fingers funnel cables into the base and hold them securely. - Enable easy cable routing. Insert and remove cables while maintaining retention. - Rounded end posts maintain proper bend radius and protects cabling as it enters and exits the manager—no tearing and gouging of jackets when quickly routing cable. - High capacity and extra depth for maximum CAT5e, CAT6, and CAT6a cabling density. - Cover hinges on the top or bottom and snaps close to protect cabling, or it can be removed. - Has large passthrough holes for running cable from side to side. - "Tool-less" snap-in design holds manager in place during installation. - Includes 10-32 and 12-24 screws for mounting. - Add the steel Horizontal Tie-Down Bar to support and maintain bend radius for cables on the back side of a rack, behind a patch panel, for example. Can also be used to support runs between the horizontal and vertical managers, or above a patch panel to separate and control patch cables.